Economic Double Heads Metal and Non-Metal Co2 Laser Engraving Cutting Machine
Applications
Applied to a certain of metal and non-metal materials Professional engraving/cutting such as stainless steel,carbon steel,wood,organic glass,plastic, cloth.
Widely used in the industry of Advertising, craft gift, shose, toys, garment, model, construction, package, paper and computerized embroidery &lipping.
Features
1. Machine with RUIDA CCD Camera auto positioning, can do visual positioning, trademark cutting, image analysis. support feature recognition position positioning and MARK point auxiliary position positioning function, improves the working efficiency.
Multi-graphic positioning and cutting at any angle, automatic identification of defective products, can achieve the effect of cutting along the edge, no yellow, no black, no burn, multiple graphics positioning and cutting at the same time
2.Welding machine bed with quenching treatment to remove away the stress .Milled by Large precision gantry milling machine ensured the accuracy.
3.Equipped with dual economic metal&non-metal cutting head. Stainless steel, carbon steel, acrylic and wood can be cut.
Laser head A1: with Reci W6 130W Co2 laser tube, mainly used for thin 1.2mm thickness stainless steel/steel cutting & thick non-metal cutting, laser head A2: with Reci W2 90W Co2 laser tube, used for non-metal precision engraving
4. Adopting imported focus lens with high luminous and mirror with high relativity ensure stable power transference and laser beam consistency.
5. Working Table: double working table and auto lifting table
Honey Comb Table: applicable to various soft materials with Good adsorption effect and low reflection ratio.
Knife Strips: With oxidation treatment and low reflection ratio ensured cutting quality
Auto Lifting Table：Maximum Loading 50kgs with 200mm up-down distance.
6.Motion System: Imported High precision, low friction force and stand wear and CSK Taiwan linear square guide rail and blocks with 3M belt ensured stable transmission, lower noise
7.With advanced embedded RuiDa RDV6445G(EC) real-time economic metal & non metal CCD laser cutting engraving control system, running faster, laser intensity and speed automatic matching, perfectly realized the consistency of the corner cutting effect high strength cutting table, applicable for metal and non-metal cutting.
8.Rationalized placement of the electronic parts. Optimized heat dissipation effect. Ensured system stability and anti jamming capability.
9.Industrial water chiller CW-5202 for dual head is equipped to ensure the machine can work last long time.
10. Air filter with 5 layers filtration, during the laser engraving cutting machine using, can filtering a mass of gas & smoke which are harmful to human health when engraving & cutting processing materials. Has the feature of low noise, flexible using, and cover small area.
11. Roller type for cylinder engraving, no dimaeter limitation, sepcially for goblet engraving.
Technical Parameters
|
Effective working area of each head
|
1150*900mm
|
|
Laser Type
|
Co2 sealed-off laser tube
|
|
Laser tube power
|
A1: Reci W6 130W
A2: Reci W2 90W
|
|
Working table
|
Honey comb and knife strip double working table
|
|
Lifting table
|
Automatically up and down 200mm
|
|
Focusing
|
Auto
|
|
Driver mode
|
3 phases stepper motor and Driver, Yako brand
|
|
Guide rail
|
Linear square guide rail ( CSK,Taiwan)
|
|
Transmission
|
Belt transmission
|
|
Control panel
|
English
|
|
Laser output control
|
1-100% software setting
|
|
Engraving speed
|
0-60000mm/min
|
|
Cutting speed
|
0-10000mm/min
|
|
Control system
|
RuiDa RDV6445G small vision laser cutting engraving control system
|
|
CCD camera
|
RuIDa SV300, USB port
|
|
Design software when delivery
|
CorelDraw
|
|
Control panel
|
DSP offline
|
|
Resolution accuracy
|
< 0.01mm
|
|
Location precision
|
< 0.01mm
|
|
Highest scanning accuracy
|
2500DPI
|
|
Type of cooling
|
Industrial chiller CW-5202( S&A) cooling
|
|
Water protection system
|
Yes
|
|
Focus
|
Auto focus
|
|
Blow-off system
|
Air pump and air blower
|
|
Working temperature
|
0-45 °C
|
|
Operating humidity
|
5-95% (without condensed water)
|
|
Supporting picture format
|
PLT、DST、DXF、BMP, DWG、AI、LAS,etc
|
|
Voltage
|
AC 220V/110V, 50/60Hz, single phase
|
|
Certificate
|
CE/FDA
|
Reference Working Videos
https://youtu.be/WXqUfqnLhs4
For more information, just feel free to contact us!
Jinan Upgoal Mechanical Equipment Co.,Ltd
CNC Router/Laser Engraving Cutting Marking Welding Cleaning Machine/Plasma Cutting Machine/CNC Wood Lathe
