• 130W Mixed Co2 Laser Cutting Engraving Machine for 1.5mm Metal Non Metal
  • 130W Mixed Co2 Laser Cutting Engraving Machine for 1.5mm Metal Non Metal
  • 130W Mixed Co2 Laser Cutting Engraving Machine for 1.5mm Metal Non Metal
  • 130W Mixed Co2 Laser Cutting Engraving Machine for 1.5mm Metal Non Metal
  • 130W Mixed Co2 Laser Cutting Engraving Machine for 1.5mm Metal Non Metal
  • 130W Mixed Co2 Laser Cutting Engraving Machine for 1.5mm Metal Non Metal
  • 130W Mixed Co2 Laser Cutting Engraving Machine for 1.5mm Metal Non Metal
  • 130W Mixed Co2 Laser Cutting Engraving Machine for 1.5mm Metal Non Metal
  • With chuk type rotary axis ( diameter 80mm) for metal tube cutting & non-metal cylinder engraving.
  • Equipped with dual metal&non-metal laser cutting head. Stainless steel, carbon steel, acrylic and wood can be cut. 
  • With advanced embedded RuiDa 6332M DSP real-time laser cutting control system, running faster, laser intensity and speed automatic matching, perfectly realized the consistency of the corner cutting effect.   4. Specialized metal cutting using non-contact RuiDa live focusing system, ensuring same cutting quality for whole working table, no need further processing for the fracture section, high efficiency, long life time and more stable.
  • 130W Mixed Co2 Laser Cutting Engraving Machine for 1.5mm Metal Non Metal
  • A1 head With famous Reci W6 130W Co2 laser tube, can for 1.5mm thickness stainless steel/carbon steel cutting, also can for thick non metal materials cutting.  A2 with Reci W2 90W Co2 laser tube, used for non-metal materials fine engraving & thin cutting.
  • Control cabinet
  • Adopt 3phases Leadshine stepper driver with high dynamic response performance and loading capacity.
  • Honey Comb Table: applicable to various soft materials with good adsorption effect and low reflection ratio.  Knife Strip Table:  With oxidation treatment and low reflection ratio Ensured cutting quality  Auto Lifting Table for more thickness materials:Maximum Loading 50kgs with 300mm up-down distance.
  • 130W Mixed Co2 Laser Cutting Engraving Machine for 1.5mm Metal Non Metal
  • Accessories and packing
  • 130W Mixed Co2 Laser Cutting Engraving Machine for 1.5mm Metal Non Metal
  • 130W Mixed Co2 Laser Cutting Engraving Machine for 1.5mm Metal Non Metal

130W Mixed Co2 Laser Cutting Engraving Machine for 1.5mm Metal Non Metal

Model No.︰

UG-1390ML

Brand Name︰

UPGOAL

Country of Origin︰

China

Unit Price︰

US $ 1000 / set

Minimum Order︰

1 set

Share on:

Product Description

130W Mixed Co2 Laser Cutting Engraving Machine for 1.5mm Metal Non Metal  

 

Applications

 

Applied to a certain of metal and non-metal materials Professional engraving/cutting such as stainless steel,carbon steel,wood,organic glass,plastic, cloth.

Widely used in the industry of Advertising, craft gift, shose, toys, garment, model, construction, package, paper and computerized embroidery &lipping.

 

Features

1. Welding machine bed with quenching treatment to remove away the stress .Milled by Large precision gantry milling machine ensured the accuracy.  

2. Equipped with dual metal&non-metal laser cutting head. Stainless steel, carbon steel, acrylic and wood can be cut. 

A1 head With famous Reci W6 130W Co2 laser tube, can for 1.5mm thickness stainless steel/carbon steel cutting, also can for thick non metal materials cutting.  A2 with Reci W2 90W Co2 laser tube, used for non-metal materials fine engraving & thin cutting.

 

3. With advanced embedded RuiDa 6332M DSP real-time laser cutting control system, running faster, laser intensity and speed automatic matching, perfectly realized the consistency of the corner cutting effect

4. Specialized metal cutting using non-contact RuiDa live focusing system, ensuring same cutting quality for whole working table, no need further processing for the fracture section, high efficiency, long life time and more stable.

5. With auto height controller for laser head, can track the metal material surface and adjust suitable focus length, ensuring the cutting quality.

6. Working Table

Honey Comb Table: applicable to various soft materials with good adsorption effect and low reflection ratio.

Knife Strip Table:  With oxidation treatment and low reflection ratio Ensured cutting quality

Auto Lifting Table for more thickness materials:Maximum Loading 50kgs with 200mm up-down distance.

7. Adopting imported focus lens with high luminousness and mirror with high reflection ensure stable power transference and laser beam consistency.

 

8. Adopt 3phases Yako stepper driver with high dynamic response performance and loading capacity.

9. Belt transmission type.  High speed and precision with smooth cutting surface.

10. Rationalized placement of the electronic parts. Optimized heat dissipation effect. Ensured system stability and anti  jamming capability.

11. Teyu S& A Industrial water chiller CW-5202 is equipped to ensure the machine can work last long time

 

Technical parameters

Effective working area of each head 

1150~1200*900mm

Laser Type

Glass co2 laser tube

Laser tube power

A1: 130W, Reci W6

A2: 90W, Reci W2

Working table

High strength knife strip and honey comb double working table

Auto lifting table

Up and down 300mm

Oxygen control system

Yes

Laser head

Automatic torch height controller laser head structure for metal materials 

Driver mode

3 phase stepper motor and driver(Yako brand )

Guide rail

Linear square guide rail ( CSK,Taiwan)

Transmission

Belt(3M)

Control panel

English

Laser output control

1-100% software setting

Engraving speed

0-60000mm/min

Cutting speed

0-10000mm/min

Control system

RuiDa control system 6332M (Live focus system)

Control software

MetalCut

Design software when delivery

CorelDraw

Control panel

DSP offline

Resolution accuracy

< 0.01mm

Location precision

< 0.01mm

Highest scanning accuracy

2500DPI

Type of cooling

Industrial chiller, CW-5202 (Teyu, S&A)

Water protection system

Yes

Blow-off system

Air pump and air blower

Rotary axis

Optional

Working temperature

0-45 °C

Operating humidity

5-95% (without condensed water)

Voltage

AC 220V/110V, 50/60Hz, single phase

Supporting picture format

PLTDSTDXFBMP, DWGAILAS,etc

Certificate

CE/FDA

Reference Working Videos

https://youtu.be/WIuy71mwLu0

https://youtu.be/U13dcpO1nqs

 

For more information, just feel free to contact us!

     Jinan Upgoal Mechanical Equipment Co.,Ltd

CNC Engraving Cutting Machine /Laser Engraving Cutting  Marking Machine



Payment Terms︰ T/T, L/C, Wester Union, MoneyGram...

Product Image

With chuk type rotary axis ( diameter 80mm) for metal tube cutting & non-metal cylinder engraving.With chuk type rotary axis ( diameter 80mm) for metal tube cutting & non-metal cylinder engraving.

Equipped with dual metal&non-metal laser cutting head. Stainless steel, carbon steel, acrylic and wood can be cut. Equipped with dual metal&non-metal laser cutting head. Stainless steel, carbon steel, acrylic and wood can be cut. 

With advanced embedded RuiDa 6332M DSP real-time laser cutting control system, running faster, laser intensity and speed automatic matching, perfectly realized the consistency of the corner cutting effect.   4. Specialized metal cutting using non-contact RuiDa live focusing system, ensuring same cutting quality for whole working table, no need further processing for the fracture section, high efficiency, long life time and more stable.With advanced embedded RuiDa 6332M DSP real-time laser cutting control system, running faster, laser intensity and speed automatic matching, perfectly realized the consistency of the corner cutting effect. 4. Specialized metal cutting using non-contact RuiDa live focusing system, ensuring same cutting quality for whole working table, no need further processing for the fracture section, high efficiency, long life time and more stable.

A1 head With famous Reci W6 130W Co2 laser tube, can for 1.5mm thickness stainless steel/carbon steel cutting, also can for thick non metal materials cutting.  A2 with Reci W2 90W Co2 laser tube, used for non-metal materials fine engraving & thin cutting.A1 head With famous Reci W6 130W Co2 laser tube, can for 1.5mm thickness stainless steel/carbon steel cutting, also can for thick non metal materials cutting.  A2 with Reci W2 90W Co2 laser tube, used for non-metal materials fine engraving & thin cutting.

Control cabinetControl cabinet

Adopt 3phases Leadshine stepper driver with high dynamic response performance and loading capacity.Adopt 3phases Leadshine stepper driver with high dynamic response performance and loading capacity.

Honey Comb Table: applicable to various soft materials with good adsorption effect and low reflection ratio.  Knife Strip Table:  With oxidation treatment and low reflection ratio Ensured cutting quality  Auto Lifting Table for more thickness materials:Maximum Loading 50kgs with 300mm up-down distance.Honey Comb Table: applicable to various soft materials with good adsorption effect and low reflection ratio. Knife Strip Table:  With oxidation treatment and low reflection ratio Ensured cutting quality Auto Lifting Table for more thickness materials:Maximum Loading 50kgs with 300mm up-down distance.

Accessories and packingAccessories and packing

Copyright Jinan Upgoal Mechanical Equipment Co.,Ltd . Email: info@upgoalcnc.com   Mob/WhatsApp:0086 13869132173   

Powered by DIYTrade.com